How to Install LED Tail Lights on BMW F32 / F82 / F83 4 Series & M4

Upgrading your BMW tail lights is one of the easiest ways to modernize the rear-end appearance and improve nighttime visibility.

This installation guide covers BMW F32, F82, and F83 4 Series & M4 models from 2014–2020.

SHOP NOW

Tools Needed

• Socket wrench set

• Trim removal tools

• Screwdriver

Installation time:
Approximately 30–90 minutes.

Installation Steps

Step 1 – Remove Trunk Interior Panels

Open the trunk and remove the interior trim panels behind the factory tail lights.

Step 2 – Remove Factory Tail Lights

Disconnect the wiring harness, remove the mounting nuts, and carefully remove the OEM tail lights.

Step 3 – Install New LED Tail Lights

Position the new VLAND LED tail lights into the factory mounting locations and reconnect the wiring harness.

Step 4 – Test All Functions

Check running lights, brake lights, reverse lights, and sequential turn signals before final assembly.

Step 5 – Reinstall Interior Trim

Reinstall all trunk panels and secure the clips.

Final Results

The upgraded LED tail lights give the BMW 4 Series and M4 a more modern OEM+ appearance with brighter lighting and dynamic styling.

VLAND tail lights feature:

• Sequential turn signals

• Plug-and-play installation

• OEM-style fitment

• Modern LED design